This router supports a variety of VoIP features, such as caller ID, speed dialing and distinctive ring function. A built-in SPI firewall protects the network against malicious attacks.
| RTP300 Features | |
| General | |
| Availability: | currently available |
| Street price: |
$92 |
| Warranty: | 1 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| RJ-11 FXS VoIP phone ports: | 2 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| QoS: |
|
| UPnP: |
|
| MAC Address clone: |
|
| Routing Protocols: | VLAN tagging (802.1q) |
| VoIP | |
| VoIP Protocols: |
SIP v2 (RFC 3261) SDP (RFC 2327) RTP / RTCP (RFCs 1889/1890) T.38 (Fax over IP) |
| VoIP Audio Codecs: |
G.711 (PCM) G.723.1 G.726 G.729 (a/b) |
| VoIP Voice Features: |
Echo Cancellation (G.165/G.168) Caller ID Speed Dialing Distinctive Ring Voice Activity Detection (VAD) Comfort Noise Generator (CNG) |
| Firewall | |
| SPI firewall: |
|
| Security log: |
|
| Device Management | |
| Default IP address: | 192.168.15.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Event log: |
|
| Misc hardware info | |
| NTP client: |
|
| Links | |
| Product page: | http://homesupport.cisco.com/en-us/wirel... |
| Datasheet: | http://downloads.linksysbycisco.com/down... |
| Manual: | http://homedownloads.cisco.com/downloads... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|