This access point is integrated with 802.3af/at PoE capability to eliminate external adapters and facilitate optimal placement.
LAPN300 protects your network with advanced security features including Rogue AP detection, SSID to VLAN mapping, and 802.1X Supplicant. It is IPv6 ready.
| LAPN300 Features | |
| General | |
| Availability: | currently available |
| List price: | $199 |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP client: |
|
| Routing Protocols: | VLAN tagging (802.1q) |
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: | Access point |
| internal antenna(s): | 2 |
| Antenna gain: | 1 dBi |
| Transmit Power: | +20 dBm |
| Receiver Sensitivity: | -70 dBm |
| WMM (QoS): |
|
| Device Management | |
| Default IP address: | 192.168.1.252 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Email alerts: |
|
| Event log: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
Ping, Packet Capture |
| Misc hardware info | |
| SNMP support: | SNMP v.2 |
| IPv6 support: |
|
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | http://www.linksys.com/en-us/business/pr... |
| Datasheet: | http://downloads.linksys.com/downloads/d... |
| Manual: | http://downloads.linksys.com/downloads/u... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|