This AP is 802.11n (draft 2.0) compatible, providing wireless transmission speeds of up to 300Mbps. It uses WMM (QoS) to prioritize the traffic over the network and supports WEP and WPA/WPA2 wireless encryption.
The WAP-6010 can be configured via Web-based configuration utility, including a Quick Setup Wizard or via SNMP v.1/v.2.
| WAP-6010 Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft 2.0) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Repeater mode |
| external antenna(s): | 2 |
| ext antenna(s) removable ?: |
|
| Antenna gain: | 2 dBi |
| Transmit Power: | +14 dBm |
| Receiver Sensitivity: | -74 dBm |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Device Management | |
| Default IP address: | 192.168.0.254 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.1, SNMP v.2 |
| NTP client: |
|
| Links | |
| Product page: | http://global.level1.com/product_d.php?i... |
| Datasheet: | http://download.level1.com/level1/datash... |
| Manual: | http://download.level1.com/level1/manual... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|