When configured as a DHCP server, it will assign IP address to every connected PC and acts as the only externally recognized Internet device on your local area network.
A Web-based user interface allows for the device's easy configuration.
| JDR840V3 Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN throughput: |
24 Mbps |
| WAN throughput upstream: |
1 Mbps |
| WAN ports: |
1 |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) IGMP Multicast (RFC 1112) |
| DSL | |
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) ADSL2+ (G.992.5) |
| PPPoE client: |
|
| PPPoA client: |
|
| Firewall | |
| DoS / DDoS protection: |
|
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | 1234 |
| Administration: |
Web-based (LAN) Quick Setup Wizard TFTP (RFC 1350) |
| Firmware upgradeable: |
|
| Event log: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.2 |
| NTP client: |
|
| Links | |
| Product page: | http://www.justec.com.tw/productpage/wan... |
| Datasheet: | http://www.justec.com.tw/PDF/wan/jdr840v... |
| Manual: | http://www.justec.com.tw/manual/wan/um-j... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|