The device comes with built-in firewall, filtering on IP address, MAC address, URL. It has 2 x 5dBi high gain antenna.
Easy setup simplifies the basic settings of the router.
| APTEK A12 Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| Router | |
| DMZ: |
|
| Port forwarding: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| Routing Protocols: | VLAN tagging (802.1q) |
| Wireless | |
| Maximum Wireless Speed: | 1200 Mbps (Wi-Fi 5) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) 802.11ac (Wi-Fi 5) |
| Wifi security/authentication: |
WPA (TKIP) WPA2 (AES) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Repeater mode WISP mode |
| external antenna(s): | 2 |
| Antenna gain: | 5 dBi |
| Multiple SSID: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| MU-MIMO: |
|
| Beamforming: |
|
| Dual Band (2.4GHz/5GHz): |
|
| Firewall | |
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering |
| Device Management | |
| Administration: |
Remote configuration (WAN) Telnet / CLI |
| Firmware upgradeable: |
|
| Event log: |
|
| Diagnostic functions: |
ping,traceroute |
| Misc hardware info | |
| IPv6 support: |
|
| NTP client: |
|
| Links | |
| Product page: | https://jcgcom.com/product/showProduct/6... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|