This access point can be configured in any one of five modes: 1) Access Point (AP), 2) Point-to-Point (PtP), 3) Point-to-Multi-Point (PtMP), 4) Universal Repeater or 5) AP Client (Station Infrastructure). It also supports multiple SSIDs and VLANs.
The Wireless 300N Access Point provides maximum wireless security by supporting 802.1x user authentication for external RADIUS servers and, thanks to its internal RADIUS server, the access point can be used as the authentication server in smaller networks. Other
security features included in this access point are MAC address filtering, disable SSID broadcast and support for the latest wireless encryption mechanisms.
The Wireless 300N PoE Access Point comes with a PoE PD port. This port can be used to power the device from a PoE-compliant LAN switch, which is very convenient in situations where AC power is not readily available.
| 524735 Features | |
| General | |
| Availability: | currently available |
| Street price: |
$72 |
| Warranty: | 3 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP server: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: | Spanning Tree Protocol (STP) |
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft 2.0) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode |
| external antenna(s): | 2 |
| ext antenna(s) removable ?: |
|
| Antenna gain: | 3 dBi |
| Transmit Power: | +15 dBm |
| Receiver Sensitivity: | -78 dBm |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN | |
| RADIUS support: |
|
| Device Management | |
| Default IP address: | 192.168.2.1 |
| Default admin username: | admin |
| Default admin password: | 1234 |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Misc hardware info | |
| RAM: | 16 Mb |
| Flash Memory: | 4 Mb |
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | http://www.intellinet-network.com/en-US/... |
| Datasheet: | http://assets.mhint.s3.amazonaws.com/dow... |
| Manual: | http://assets.mhint.s3.amazonaws.com/dow... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|