The AP features 2x2dBi Omni Directional Antenna. iB-WAC300P can be managed remotely via SNMP V1 & V2 protocol. Multiple SSIDs are also supported.
| iB-WAC300P Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP server: |
|
| Routing Protocols: | VLAN tagging (802.1q) |
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) Wireless MAC Address filtering |
| WiFi modes: |
Access point Repeater mode |
| internal antenna(s): | 2 |
| Receiver Sensitivity: | -68 dBm |
| Multiple SSID: |
|
| Device Management | |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.1, SNMP v.2 |
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | https://www.iball.co.in/Product/Baton/Wi... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|