| J8987A Features |
| General
|
| Availability: |
discontinued
|
| LAN / WAN Connectivity
|
| WAN ports: |
0 |
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
|
| Serial port: |
RS-232C DB-9 |
| Router
|
| DHCP client: |
|
| QoS: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: |
VLAN tagging (802.1q)
|
| Wireless
|
| Maximum Wireless Speed: |
54 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3)
|
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication SSID Broadcast disable
|
| WiFi modes: |
Access point Wireless bridge (PtP) Repeater mode
|
| external antenna(s): |
4 |
| Transmit Power: |
+23 dBm |
| Receiver Sensitivity: |
-74 dBm |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| Dual Band (2.4GHz/5GHz): |
|
| Device Management
|
| Default IP address: |
192.168.1.10 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Telnet / CLI SSH SSL secure web
|
| Firmware upgradeable: |
|
| Event log: |
|
| Misc hardware info
|
| Chipset: |
MPC8248, 400 MHz |
| RAM: |
32 Mb |
| Flash Memory: |
16 Mb |
| SNMP support: |
SNMP v.1, SNMP v.2, SNMP v.3
|
| NTP client: |
|
| Power over Ethernet (PoE): |
|
| Links
|
| Product page: |
http://h10144.www1.hp.com/products/wirel... |
| Manual: |
http://www.speedguide.net/images/hardwar... |