To manage the connections the GN-BR01G has a built-in DHCP server to auto-assign IP addresses, plus SmartDHCP technology which ensures that the devices on your network will never be assigned a duplicate address.
The GN-BR01G supports several wireless security options including WEP encryption (64/128-bit), 802.1x authentication and the wireless industry standard Wi-Fi Protected Access (WPA).
| GN-BR01G Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) |
| WiFi modes: | Access point |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| Antenna gain: | 2 dBi |
| Transmit Power: | +18 dBm |
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Device Management | |
| Default IP address: | 192.168.1.254 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Diagnostic functions: |
ping |
| Links | |
| Product page: | http://www.gigabyte.com/products/product... |
| Manual: | http://www.speedguide.net/images/hardwar... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|