M35 Features |
General
|
Availability: |
discontinued
|
LAN / WAN Connectivity
|
WAN ports: |
0 |
LAN ports: |
1 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
LAN ports auto cross-over: |
|
Router
|
DHCP server: |
|
DHCP client: |
|
Routing Protocols: |
VLAN tagging (802.1q)
|
Wireless
|
Maximum Wireless Speed: |
54 Mbps
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11g+ (108 Mbps+)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable
|
WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Repeater mode
|
external antenna(s): |
2 |
Antenna connector: |
RP-TNC (Reverse TNC)
|
Antenna gain: |
5 dBi |
Receiver Sensitivity: |
-74 dBm |
Multiple SSID: |
|
WDS compatible: |
|
WMM (QoS): |
|
VPN
|
|
IPSec |
IPSec passthrough: |
|
|
PPTP |
PPTP passthrough: |
|
Device Management
|
Default IP address: |
192.168.1.1 |
Default admin username: |
admin |
Default admin password: |
admin |
Administration: |
Web-based (LAN) Quick Setup Wizard
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Event log: |
|
Diagnostic functions: |
ping, traceroute |
Misc hardware info
|
Chipset: |
Atheros AR2316 Single Chip |
RAM: |
32 Mb |
Flash Memory: |
8 Mb |
SNMP support: |
SNMP v.1, SNMP v.2
|
NTP client: |
|
Power over Ethernet (PoE): |
|
Links
|
Product page: |
http://www.senao.com/English/Default.asp... |
Datasheet: |
http://www.speedguide.net/images/hardwar... |
Manual: |
http://www.speedguide.net/images/hardwar... |
Quick Install Guide: |
http://www.speedguide.net/images/hardwar... |