This AP can act as a DHCP client/ server. It is WDS compatible and supports WEP and WPA/WPA2 wireless encrtyption.
The ECB-3220 can be easily configured via Web-based configuration utility or via Telnet/CLI.
| ECB-3220 Features | |
| General | |
| Availability: | discontinued |
| Street price: |
$126 |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| Router | |
| NAT routing: |
 |
| Multihomed: |
|
| DHCP server: |
|
| DHCP client: |
|
| DSL | |
| PPPoE client: |
|
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode |
| external antenna(s): | 1 |
| Antenna connector: | RP-TNC (Reverse TNC) |
| Transmit Power: | +20 dBm |
| Receiver Sensitivity: | -70 dBm |
| WDS compatible: |
|
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard Telnet / CLI |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.1, SNMP v.2 |
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | http://www.senao.com/English/Default.asp... |
| Datasheet: | http://www.senao.com/images/www.senao.co... |
| Manual: | http://www.senao.com/images/www.senao.co... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|