Simply connect a 3G/3.5G USB modem card to the built-in USB port and this little broadband router will share your Internet connection with others at speeds of up to 14.4Mbps. When 3G/3.5G Internet access is not available, you also have the option of connecting a cable/xDSL modem to this device via the built-in Ethernet LAN/WAN port. The 3G-6218n is capable of switching to your wired Internet connection automatically.
Besides supporting both 3G/3.5G and Cable/xDSL modems, the 3G-6218n 3G router also supports Internet tethering via many major smart phones on the market-like iPhone, HTC, Blackberry, Nokia, Sony Ericsson, and other smart phones.
The built-in rechargeable Li-ion battery allows this miniature 3G router to be used virtually anywhere.
| 3G-6218n Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN throughput: |
14 Mbps |
| WAN ports: |
0 one USB port for 3G/3.5G USB modem |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| USB port(s): |
1 for 3G/3.5G USB modem |
| USB port type: | USB 2.0 |
| Auto-failover connection: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| Wireless | |
| Maximum Wireless Speed: | 150 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) |
| WiFi modes: |
Access point Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode WISP mode |
| internal antenna(s): | 1 |
| Transmit Power: | +14 dBm |
| Default SSID: | Edimax |
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.2.1 |
| Default admin username: | admin |
| Default admin password: | 1234 |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info | |
| RAM: | 32 Mb |
| Flash Memory: | 8 Mb |
| NTP client: |
|
| USB power cable: |
|
| Links | |
| Product page: | http://www.edimax.com/en/produce_detail.... |
| Datasheet: | http://www.edimax.com/images/Image/datas... |
| Manual: | http://www.edimax.com/images/Image/manua... |
| Quick Install Guide: | http://www.edimax.com/images/Image/manua... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|