VigorLTE 200n can have two concurrent VPN tunnels to link to the main offices or provides remote access for Network Admins. It also offers the flexibility for network management, including Port Forwarding, SPI Firewall, Content Filtering, Bandwidth Management, QoS and more.
LTE features:
* LTE Category 4
* Maximum LTE Download Speed: 150Mbps
* FDD Band: 1 (2100MHz), 3 (1800MHz), 7 (2600MHz), 8 (900MHz), 20 (800MHz)
* WCDMA (3G) Band: 1, 8
| VigorLTE 200n Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN throughput: |
300 Mbps |
| WAN ports: |
2 LAN P2 port can be configured as a WAN port |
| WAN port(s) type: | SIM card slot |
| LAN ports: | 2 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| UPnP: |
|
| Routing Protocols: |
RIP v2 (dynamic routing, RFC1389) VLAN tagging (802.1q) IGMP Multicast (RFC 1112) |
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: | 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) SSID Broadcast disable |
| WiFi modes: |
Access point Wireless bridge (PtP) Repeater mode |
| external antenna(s): | 2 |
| ext antenna(s) removable ?: |
|
| Antenna gain: | 2 dBi |
| WDS compatible: |
|
| WPS (Wi-Fi Protected Setup): |
|
| 4G LTE: | 1 (2100MHz), 3 (1800MHz), 7 (2600MHz), 8 (900MHz), 20 (800MHz) |
| VPN | |
| VPN Authentication: | MD5 (128-bit), SHA1 (160-bit), SHA2, IKE (IPSec) Key Management |
| IPSec | |
| IPSec passthrough: |
|
| IPSec simultaneous tunnels: | 2 |
| IPSec throughput: | 50 Mbps |
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking |
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Telnet / CLI SSH |
| Firmware upgradeable: |
|
| Event log: |
|
| Diagnostic functions: |
ping |
| Misc hardware info | |
| SNMP support: | SNMP v.2 |
| IPv6 support: |
|
| Links | |
| Product page: | https://www.draytek.com/products/vigorlt... |
| Datasheet: | https://www.speedguide.net/images/hardwa... |
| Quick Install Guide: | https://www.speedguide.net/images/hardwa... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|