The integrated access point complies with IEEE 802.11n standard, providing wireless transmission speeds of up to 300Mbps. It supports WMM (QoS) to prioritize the traffic over the network. A WPS button allows for easy wireless security configuration.
The Vigor 2920n supports VPN pass-through for IPSec, L2TP and PPTP, allowing you to establish up to 32 simultaneous IPSec VPN tunnels. It features a built-in SPI firewall to protect the network against Denial of Service (DoS) attacks.
The router can be easily configured via Web-based configuration utility or via Telnet/CLI.
| Vigor 2920n Features | |
| General | |
| Availability: | currently available |
| Street price: |
$335 |
| Warranty: | 2 year(s) |
| LAN / WAN Connectivity | |
| WAN throughput: |
150 Mbps |
| WAN ports: |
1 one 10/100/1000Mbps WAN port, one USB port for 3G modem |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
|
| USB port(s): |
1 for printers, storage devices, 3G USB modems |
| USB port type: | USB 2.0 |
| Auto-failover connection: |
|
| Load Balancing: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| DNS proxy: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| UPnP: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) VLAN tagging (802.1q) IGMP Multicast (RFC 1112) |
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: | Access point |
| external antenna(s): | 3 |
| ext antenna(s) removable ?: |
|
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN | |
| VPN Authentication: | MD5 (128-bit), SHA1 (160-bit), IKE (IPSec) Key Management |
| VPN Encryption: | DES (56-bit), 3DES (168-bit), AES (128-bit) |
| RADIUS support: |
|
| IPSec | |
| IPSec passthrough: |
|
| IPSec simultaneous tunnels: | 32 |
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering, date/time scheduling |
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Quick Setup Wizard Telnet / CLI SSH |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Email alerts: |
|
| Event log: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
ping, traceroute |
| Misc hardware info | |
| SNMP support: | SNMP v.2 |
| NTP client: |
|
| Print Server: |
|
| Links | |
| Product page: | https://www.draytek.com/index.php?lang=e... |
| Datasheet: | /images/hardware/draytek/vigor2920_ds.pd... |
| Manual: | /images/hardware/draytek/vigor2920_ug.pd... |
| Quick Install Guide: | /images/hardware/draytek/vigor2920_qig.p... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
JW - 2011-12-03 12:10
L2TP over IPSEC VPN connections are very unstable, in the best case the connection exist for a hour, but normally it breaks before.
Sometimes the 2920n goes in state where it reboots each time after the WAN connection is established. The only solution to get out of this loop, is to disconnect the WAN cable and do a complete factory reset. The maximum VPN througput is only 15Mbits/s. |
|
|