A four port Gigabit switch on the LAN side provides high speed connectivity for your server or other local PCs, for the highest speed local data transfer. Security features include content filtering, web application controls and new object based firewall management system.
As well as the primary ADSL (WAN) interface, the Vigor 2830 features two other WAN connections. WAN2 is Ethernet (Gigabit) and WAN3 is a USB port for connection of a 3G modem. WAN2 (Ethernet) can connect to a second ADSL modem, a cable modem or any other Ethernet-based Internet feed. The multiple WAN interfaces can be used either for WAN-Backup or load balancing.
| Vigor 2830 Features | |
| General | |
| Availability: | currently available |
| Warranty: | 2 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
1 one 10/100/1000Mbps WAN port, one USB port for 3G modem |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| LAN ports: | 4 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
 |
| USB port(s): |
1 for 3G USB modem, printers and storage |
| USB port type: | USB 2.0 |
| Auto-failover connection: |
|
| Load Balancing: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| DNS proxy: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| UPnP: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) VLAN tagging (802.1q) IGMP Multicast (RFC 1112) |
| DSL | |
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) RE-ADSL2 (G.992.3 Annex L) ADSL2+ (G.992.5) ADSL2+M (G.992.5 Annex M) |
| PPPoE client: |
|
| PPPoA client: |
|
| VPN | |
| RADIUS support: |
|
| IPSec | |
| IPSec passthrough: |
|
| IPSec simultaneous tunnels: | 32 |
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | (blank) |
| Default admin password: | (blank) |
| Administration: |
Web-based (LAN) Quick Setup Wizard Telnet / CLI |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Email alerts: |
|
| Event log: |
|
| Diagnostic functions: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.2 |
| NTP client: |
|
| Print Server: |
|
| Links | |
| Product page: | http://www.draytek.co.uk/products/vigor2... |
| Manual: | http://www.speedguide.net/images/hardwar... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|