for your network than previous-generation IEEE802.11g technology.
It also includes QoS (Quality of Service) prioritization technology that analyzes and separates multiple data streams based on sensitivity to delay, enabling multiple applications to stream smoothly across your network.
The DG-HR3400 supports several operating modes: Access Point, Wireless client, Wireless repeater and Wireless bridge.
| DG-HR3400 Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| MAC Address clone: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: | |
| Wifi security/authentication: | |
| WiFi modes: | |
| external antenna(s): | 2 |
| ext antenna(s) removable ?: |
 |
| Antenna gain: | 5 dBi |
| Transmit Power: | +19 dBm |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | |
| Device Management | |
| Default IP address: | 192.168.2.1 |
| Default admin username: | admin |
| Default admin password: | 1234 |
| Administration: | |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Diagnostic functions: |
ping, traceroute |
| Misc hardware info | |
| RAM: | 16 Mb |
| Flash Memory: | 2 Mb |
| Links | |
| Product page: | http://smartlink.co.in/digisol/product-s... |
| Datasheet: | http://smartlink.co.in/digisol/wp-conten... |
| Manual: | http://smartlink.co.in/digisol/wp-conten... |
| Quick Install Guide: | http://smartlink.co.in/digisol/wp-conten... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
anonymous - 2016-08-11 20:03
plz help..
while configuring the router digisol dg hr1400 its shows 192.168.2.1:Telnet failed in the 1st step while entering the router's default password 1234 then click on login
Please send me link to download latest Digisol HR 3400 firmware so that i can update it. It's urgent.
At the time of installation using users name with default password 1234 a dialogue box is appeared '192.168.2.1 telnet failed' and it is not connected. So what can I do ? Please help me.
If telnet fails, that means either telnet is disabled, or the password has been changed from the default.
If you are setting near to router i.e 1-2 meter distance then connectivity is good. But if you go the distance like 4-5 meter then latency start increasing and it becomes worst. Even I tried ti updated router firmware but didn't find any link on their side.
Hi,
I have digisol HR3400. The router console is unable to save custom dns servers in the internet setup.
Please help me,i can't find digisol wifi Adapter dg-hr3400 driver to download
|
|
|