data which enables you to receive wireless signals faster at your home.
The wireless router also includes QoS (Quality of Service) prioritization technology that analyzes and separates multiple data streams based on sensitivity to delay, enabling multiple applications to stream smoothly across your network.
DG-HR1400 supports wireless 802.11b/g/n and the following security protocols: WEP, WPA, WPA2.
DG-HR1400 wireless broadband router supports WPS (Wi-Fi Protected Setup), which simplifies wireless client setup procedures (using push button), so that even an inexperienced user can setup a secured wireless network.
| DG-HR1400 Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| Wireless | |
| Maximum Wireless Speed: | 150 Mbps (Wi-Fi 4) |
| WiFi standards supported: | |
| Wifi security/authentication: | |
| WiFi modes: | |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
 |
| Antenna gain: | 5 dBi |
| Transmit Power: | +19 dBm |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Firewall | |
| DoS / DDoS protection: |
|
| Filtering: | |
| Device Management | |
| Default IP address: | 192.168.2.1 |
| Default admin username: | admin |
| Default admin password: | 1234 |
| Administration: | |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Diagnostic functions: |
|
| Misc hardware info | |
| RAM: | 16 Mb |
| Flash Memory: | 2 Mb |
| IPv6 support: |
|
| Links | |
| Product page: | http://smartlink.co.in/digisol/product-s... |
| Datasheet: | http://smartlink.co.in/digisol/wp-conten... |
| Manual: | http://smartlink.co.in/digisol/wp-conten... |
| Quick Install Guide: | http://smartlink.co.in/digisol/wp-conten... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
Arpan - 2016-02-05 08:14
plz help..
while configuring the router digisol dg hr1400 its shows 192.168.2.1:Telnet failed in the 1st step while entering the router's default password 1234 then click on login :(
me too, facing same problem(192.168.2.1 telnet failed), while configuring DG-HR3400
192.168.2.1 TELNET FAILED..This error message is shown in the first page of login network address..If anybody know how to fix this..Please help me out..
|
|
|