Shortcuts
|
 |
Cradlepoint MBR1000
|
| details: | Mobile Cellular Failsafe Broadband N Router |
| hardware type: | Travel Router |
| date added: | 2009-02-08 |
| updated: | 2015-10-25 |
The CradlePoint MBR1000 is a robust 802.11N router with 3G failover capability for small office/home office, temporary and remote enterprise environments for continuous, always-available connectivity. With its built-in failover capability, the MBR1000 automatically switches from wired to wireless networking when the primary ISP service is disrupted. Once service is restored, the MBR1000 will automatically failback to the primary ISP without interruption to users. Your business is always connected.
Enterprise Power, SOHO Simple
Powered by WiPipe technology, the MBR1000 includes many features found in expensive, enterprise-class routers, such as load balancing and SNMP, at a fraction of the cost with minimal set up and maintenance. No software to load means no IT interaction is necessary and you'll be up and running in minutes.
The MBR1000 supports multiple and Concurrent IPSEC, L2TP and PPTP VPN pass-through sessions. WPS Security allows quick configuration and addition of new network nodes.
Also tetherable to wide range of 3G cellular handsets via USB port for emergency backup
One other interesting feature is the ability to display GPS data from a compatible modem/headset, and export GPS data to the network.
| MBR1000 Features |
| General
|
| Availability: |
discontinued
|
| List price: |
$250 |
| Street price: |
$240
|
| LAN / WAN Connectivity
|
| WAN ports: |
1
also 2-USB 3G modem ports, 1 ExpressCard modem slot |
| WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
| LAN ports: |
4 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| USB port(s): |
2
modem ports, also 1 Express card modem port |
| Auto-failover connection: |
 |
| Load Balancing: |
|
| Rate limiting: |
per client (IP)
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| Routing Protocols: |
IGMP Multicast (RFC 1112)
|
| VoIP
|
| VoIP Protocols: |
SIP v2 (RFC 3261)
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (draft)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
RADIUS authentication
|
| WiFi modes: |
Access point
|
| external antenna(s): |
3 |
| ext antenna(s) removable ?: |
 |
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: |
Domain/URL blocking, MAC Address filtering, keyword/content filtering, date/time scheduling
|
| Device Management
|
| Default IP address: |
192.168.0.1 |
| Default admin username: |
n/a |
| Default admin password: |
last 6 digits of the MAC address |
| Administration: |
Web-based (LAN)
Telnet / CLI
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Email alerts: |
|
| Event log: |
|
| Diagnostic functions: |
ping |
| Misc hardware info
|
| NTP client: |
|
| Links
|
| Product page: |
https://cradlepoint.com/support/cradlepo... |
| Datasheet: |
https://cradlepoint.com/sites/default/fi... |
| Manual: |
https://cradlepoint.com/sites/default/fi... |
| Quick Install Guide: |
https://cradlepoint.com/sites/default/fi... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
