The DPC2203 is designed to meet PacketCable 1.5, PacketCable 1.0, and DOCSIS 2.0
specifications as well as being backward compatible with DOCSIS 1.1 and DOCSIS 1.0 networks.
The DPC2203 fully supports the CODECs specified in PacketCable 1.5. Additional CODECs are available through a software upgrade that includes a high fidelity CODEC option for toll-quality plus service.
| DPC2203 Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | Coax F-connector |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| USB port(s): |
1 for client PCs |
| USB port type: | USB 1.1 |
| RJ-11 FXS VoIP phone ports: | 2 |
| Router | |
| QoS: |
|
| Cable Modem | |
| DOCSIS compliance: |
DOCSIS 1.0 DOCSIS 1.1 DOCSIS 2.0 |
| PacketCable: |
PacketCable 1.0/1.1 (VoIP) PacketCable 1.5 (VoIP) |
| VoIP | |
| VoIP Protocols: |
SIP v2 (RFC 3261) RTP / RTCP (RFCs 1889/1890) T.38 (Fax over IP) |
| VoIP Audio Codecs: |
G.711 (PCM) G.723.1 G.726 G.728 G.729 (a/b) iLBC (Internet Low Bitrate Codec) |
| VoIP Voice Features: |
Echo Cancellation (G.165/G.168) 3-way conferencing Caller ID Call waiting Call forward |
| Device Management | |
| Default IP address: | 192.168.0.1 |
| Default admin username: | (blank) |
| Default admin password: | (blank) |
| Administration: |
Web-based (LAN) Quick Setup Wizard Telnet / CLI |
| Firmware upgradeable: |
|
| Event log: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.2, SNMP v.3 |
| Links | |
| Datasheet: | http://www.cisco.com/en/US/prod/collater... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|