This router supports VPN pass-through for IPSec, L2TP and PPTP, allowing you to establish up to ten simultaneous VPN tunnels. A built-in SPI firewall protects the network against unauthorized access.
| 877 Features | |
| General | |
| Availability: | currently available |
| Street price: |
$400 |
| Warranty: | 1 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Serial port: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) Spanning Tree Protocol (STP) VLAN tagging (802.1q) |
| DSL | |
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) RE-ADSL2 (G.992.3 Annex L) ADSL2+ (G.992.5) |
| PPPoE client: |
|
| PPPoA client: |
|
| VPN | |
| VPN Encryption: | 3DES (168-bit), AES (128-bit) |
| IPSec | |
| IPSec passthrough: |
|
| IPSec simultaneous tunnels: | 10 |
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| Security log: |
|
| Device Management | |
| Default IP address: | 10.10.10.1 |
| Default admin username: | cisco |
| Default admin password: | cisco |
| Administration: |
Web-based (LAN) Quick Setup Wizard Telnet / CLI Windows application |
| Firmware upgradeable: |
|
| Event log: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.3 |
| Links | |
| Product page: | http://www.cisco.com/en/US/products/ps62... |
| Datasheet: | http://www.cisco.com/en/US/prod/collater... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|