The integrated access point provides speeds of up to 300Mbps and supports WMM (QoS), WPS function and WEP and WPA/WPA2 wireless encryption.
A built-in SPI firewall provides a reliable protection against malicious attacks.
| WHR-G300N Features | |
| General | |
| Availability: | currently available |
| List price: | $69 |
| Street price: |
$52 |
| Warranty: | 2 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| QoS: |
|
| UPnP: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft 2.0) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) |
| WiFi modes: | Access point |
| internal antenna(s): | 2 |
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Firewall | |
| SPI firewall: |
|
| Filtering: | packet filtering |
| Device Management | |
| Default IP address: | 192.168.11.1 |
| Default admin username: | root |
| Default admin password: | (blank) |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Misc hardware info | |
| Chipset: | Ralink3052 RT3052F, 384MHz |
| RAM: | 32 Mb |
| Flash Memory: | 4 Mb |
| Third-party firmware support: |
DD-WRT |
| Links | |
| Product page: | http://www.buffalotech.com/products/wire... |
| Manual: | http://cdn.cloudfiles.mosso.com/c85091/W... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|