AirStation N600 Dual Band features multi-level wireless encryption options to prevent unauthorized access and protect your important data.
* WPA2, WPA-PSK (AES, TKIP), 128/24-bit WEP
* AOSS and WPS push button setup options automatically configure a secure wireless connection.
The AirStation's default LAN-side IP address depends on the mode. In router mode: 192.168.11.1. In bridge (access point) mode: 192.168.11.100. If the mode switch is set to Auto and the AirStation is in bridge (access point) mode, the AirStation's IP address is assigned by an external DHCP server.
| WHR-600D Features | |
| General | |
| Availability: | currently available |
| Warranty: | 3 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| USB port(s): |
1 for client devices |
| USB port type: | USB 2.0 |
| Router | |
| NAT routing: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port forwarding of ranges: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| DSL | |
| PPPoE client: |
|
| Wireless | |
| Maximum Wireless Speed: | 600 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: | Access point |
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| Device Management | |
| Default IP address: | 192.168.11.1 |
| Alternate Admin URL: | 192.168.11.100 |
| Default admin username: | admin |
| Default admin password: | password |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Diagnostic functions: |
ping |
| Misc hardware info | |
| IPv6 support: |
|
| NTP client: |
|
| Notes: | The default IP address is 192.168.11.1 in router mode, and 192.168.11.100 in bridge/access point mode. |
| Links | |
| Product page: | http://www.buffalotech.com/products/wire... |
| Manual: | http://www.buffalotech.com/support-and-d... |
| Quick Install Guide: | http://www.buffalotech.com/support-and-d... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|