WPA/WPA2 encryption standards and preset security settings get you up and running safely. One-touch Wi-Fi Protected Setup (WPS) securely connects multiple computers and devices with the push of a button.
The installation of the device is easy, using the Web-based User Interface.
| F9K1001 Features | |
| General | |
| Availability: | currently available |
| Warranty: | 2 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| UPnP: |
|
| Wireless | |
| Maximum Wireless Speed: | 150 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) |
| WiFi modes: | Access point |
| WPS (Wi-Fi Protected Setup): |
|
| Firewall | |
| SPI firewall: |
|
| Device Management | |
| Default IP address: | 192.168.2.1 |
| Alternate Admin URL: | http://router |
| Default admin username: | n/a |
| Default admin password: | n/a |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Links | |
| Product page: | http://www.belkin.com/IWCatProductPage.p... |
| Manual: | http://www.belkin.com/networking/manual/... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
paganize - 2011-10-28 04:04
It desperately needs a patch, hack whatever. in 802.11n mode, which allows n,g or b devices to connect, it only allows AES encryption, no TKIP; in 802.11g mode, it only allows g devices to connect, but does allow TKIP. so if you have a device that will only connect to 802.11b and requires TKIP, like a whole gigantic bunch of devices, you cannot connect using WPA/WPA2.
I concur
|
|
|