According to Belkin, the unit provides up to 800% greater coverage, and 600% greater speeds than 802.11g, when used with matching network adapters. The unit comes with 6-month free subscription to a parental control/web content filter service.
| F5D8230-4 Features | |
| General | |
| Availability: | discontinued |
| Release Date: | 2005-09-01 |
| List price: | $159 |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| USB port(s): |
0 |
| Serial port: |
 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port forwarding of ranges: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| DNS proxy: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| DSL | |
| PPPoE client: |
|
| Wireless | |
| Maximum Wireless Speed: | 108 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft) |
| Wifi security/authentication: |
WEP WPA (TKIP) |
| WiFi modes: | Access point |
| external antenna(s): | 3 |
| ext antenna(s) removable ?: |
|
| Default SSID: | belkin |
| Firewall | |
| DoS / DDoS protection: |
|
| Security log: |
|
| Filtering: | Domain/URL blocking, MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.2.1 |
| Default admin username: | (blank) |
| Default admin password: | (blank) |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard SSL secure web |
| Firmware upgradeable: |
|
| Event log: |
|
| Misc hardware info | |
| Chipset: | Broadcom4704, 300MHz |
| RAM: | 16 Mb |
| Flash Memory: | 4 Mb |
| NTP client: |
|
| Third-party firmware support: |
DD-WRT |
| Links | |
| Product page: | http://www.belkin.com/ |
| Manual: | http://cache-www.belkin.com/support/dl/p... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
ezseeker - 2008-02-24 22:11
Setup is extremely easy, hardwired connection works fine. Wireless connection drops out several times a day, and router must be rebooted. Belkin support tried to resolve issue but could not provide much help. Their only suggestion that helped the router stay connected was to change MTU setting to 1400, which ended up slowing the wireless speed to 10 Mb/s.
|
|
|