The integrated access point complies with the IEEE 802.11b/g standards, providing wireless transmission speeds of up to 54Mbps. It can operate in wireless bridge mode, as well, and supports WEP and WPA wireless encryption.
This router features a built-in SPI firewall to protect the network against malicious attacks.
| F5D7633-4 Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| NAT routing: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port forwarding of ranges: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| DSL | |
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) ADSL2+ (G.992.5) |
| PPPoA client: |
|
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) |
| WiFi modes: |
Access point Wireless bridge (PtP) |
| internal antenna(s): | 2 |
| external antenna(s): | 0 |
| ext antenna(s) removable ?: |
 |
| Firewall | |
| SPI firewall: |
|
| Security log: |
|
| Filtering: | MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.2.1 |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard Telnet / CLI |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Misc hardware info | |
| Chipset: | Broadcom 6348 |
| NTP client: |
|
| Links | |
| Product page: | www.belkin.com/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|