This product uses existing AC electrical wiring as a physical medium for broadband networking based on the HomePlug AV standard. The HomePlug AV standard supports data rates up to 200 Mbps.
The ADSL2+ modem is compatible with the latest ADSL standards, including ADSL2 and ADSL2+, and supports up to 24Mbps downstream and 1Mbps upstream to deliver true broadband speed and throughput.
The router supports WMM (QoS) to prioritize traffic over the network.
| TN263HR3-X0 Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN throughput: |
24 Mbps |
| WAN throughput upstream: |
1 Mbps |
| WAN ports: |
1 |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| LAN ports: | 3 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Powerline Networking: | HomePlug AV (200Mbps, 128-bit AES) |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) |
| DSL | |
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) ADSL2+ (G.992.5) |
| PPPoE client: |
|
| PPPoA client: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) |
| WiFi modes: | Access point |
| WMM (QoS): |
|
| Device Management | |
| Administration: |
Web-based (LAN) TFTP (RFC 1350) |
| Firmware upgradeable: |
|
| Event log: |
|
| Diagnostic functions: |
|
| Links | |
| Product page: | http://www.baudtec.com.tw/products.htm |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|