Shortcuts
|
|
4ipnet EAP700
|
details: | Wall Jack Wireless Access Point |
hardware type: | Wireless Access Point |
date added: | 2010-11-09 |
updated: | 2020-03-29 |
The EAP700 is an in/on-the-wall as well as a ceiling-mounted wireless access point with one 10/100Base-T LAN port, providing 802.3af Power over Ethernet (PoE) support.
This AP complies with IEEE 802.11g standard. Using "G+" technology, it provides wireless transmission speeds of up to 108Mbps. It is WDS compatible and uses WMM (QoS) to prioritize the traffic over the network.
This device can act as a DHCP client. It can be easily configured via Web-based configuration utility or via SNMP.
EAP700 Features |
General
|
Availability: |
discontinued
|
LAN / WAN Connectivity
|
WAN ports: |
0 |
LAN ports: |
1 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
LAN ports auto cross-over: |
|
Router
|
DHCP client: |
|
QoS: |
|
ToS / DiffServ: |
|
Routing Protocols: |
VLAN tagging (802.1q)
|
Wireless
|
Maximum Wireless Speed: |
108 Mbps
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11g+ (108 Mbps+)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication Wireless MAC Address filtering SSID Broadcast disable
|
WiFi modes: |
Access point Wireless bridge (PtP) Repeater mode
|
Receiver Sensitivity: |
-74 dBm |
Multiple SSID: |
|
WDS compatible: |
|
WMM (QoS): |
|
Device Management
|
Default IP address: |
192.168.1.1 |
Default admin username: |
admin |
Default admin password: |
admin |
Administration: |
Web-based (LAN)
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Event log: |
|
Usage Statistics: |
|
Misc hardware info
|
SNMP support: |
SNMP v.1, SNMP v.2
|
Power over Ethernet (PoE): |
|
Links
|
Quick Install Guide: |
http://www.speedguide.net/images/hardwar... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|