Shortcuts
|
 |
XiNCOM XC-DPG402
|
| details: | Dual WAN ports and a 4-port switch |
| hardware type: | Multi-WAN Router |
| date added: | 2005-01-30 |
| updated: | 2013-05-16 |
The XC-DPG402 is a broadband router with 2 10Mbps WAN ports and four 10/100Mbps LAN ports, providing WAN throughput of up to 12Mbps. It supports auto-failover for uninterrupted Internet connection and uses load-balancing between the two WAN ports.
This router supports VPN pass-through for IPSec, L2TP and PPTP. It features a built-in SPI firewall to protect the network from hackers and Denial of Service (DoS) attacks.
The router can be easily configured via Web-based configuration utility or via SNMP v.1.
| XC-DPG402 Features |
| General
|
| Availability: |
discontinued
|
| Street price: |
$180
|
| LAN / WAN Connectivity
|
| WAN throughput: |
12 Mbps
|
| WAN ports: |
2
|
| WAN port(s) type: |
10 Base-T (RJ-45)
|
| LAN ports: |
4 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Auto-failover connection: |
|
| Load Balancing: |
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Multi-DMZ: |
|
| Port forwarding: |
|
| Port forwarding of ranges: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
 |
| ToS / DiffServ: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
|
| DSL
|
| PPPoE client: |
|
| VPN
|
| |
IPSec |
| IPSec server: |
|
| IPSec client: |
|
| IPSec passthrough: |
|
| |
L2TP |
| L2TP server: |
|
| L2TP client: |
|
| L2TP passthrough: |
|
| |
PPTP |
| PPTP server: |
|
| PPTP client: |
|
| PPTP passthrough: |
|
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: |
Domain/URL blocking
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
admin |
| Default admin password: |
(blank) |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
|
| Email alerts: |
|
| Misc hardware info
|
| Chipset: |
RISC 50MHz processor, 512Kb Flash memory |
| RAM: |
4 Mb |
| SNMP support: |
SNMP v.1
|
| Notes: |
Support for multiple-session PPPoE as well. Load Balancing type can be set by packets, bytes rx+tx and sessions. |
| Links
|
| Product page: |
http://www.xincom.com/products.php |
| Datasheet: |
http://speedguide.net/images/hardware/xi... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
