Shortcuts
|
 |
Winstars WS-WN568N5
|
| details: | N300 Dual Band AP/Repeater |
| hardware type: | Wireless Access Point |
| date added: | 2016-02-12 |
The Dual Band Repeater is used for providing free WiFi service in big area such as factory, community, street or etc.
The Repeater can take an existing 802.11n wireless signal, repeat and extend it to a longer range where it is too far away for the router or access point to reach. It simultaneously supports 2.4G and 5G wireless network connection, and it can supports 2.4G or 5G transmission speeds of up to 300Mbps.
It has 3dBi Antennas providing even better wireless performance, transmission rates, stability technology automatically avoids channel conflicts using its channel selection feature.
| WS-WN568N5 Features |
| General
|
| Availability: |
currently available
|
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
Wireless client
Repeater mode
|
| internal antenna(s): |
2 |
| Antenna gain: |
2 dBi |
| Transmit Power: |
+14 dBm |
| Receiver Sensitivity: |
-70 dBm |
| WDS compatible: |
|
| WPS (Wi-Fi Protected Setup): |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| Device Management
|
| Administration: |
Web-based (LAN)
|
| Firmware upgradeable: |
|
| Misc hardware info
|
| Chipset: |
RTL8196C + RTL8192DR |
| RAM: |
128 Mb |
| Flash Memory: |
16 Mb |
| Links
|
| Product page: |
http://www.win-star.com/eshop/goods.php?... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
