Shortcuts
|
|
TP-Link TL-ER6120
|
details: | SafeStream Gigabit Multi-WAN VPN Router |
hardware type: | Multi-WAN Router |
date added: | 2011-10-06 |
updated: | 2015-02-16 |
The TL-ER6120 supports multiple VPN protocols including IPsec, PPTP and L2TP in Client/Server mode and can handle pass-through traffic as well. It also features a built-in hardware-based VPN engine allowing the router to support and manage up to 100 LAN-to-LAN/Client-to-LAN IPsec VPN connections.
For defense against external threats, TL-ER5120 features an automatic protection to detect and block Denial of service (DoS) attacks such as TCP/UDP/ICMP Flooding, TCP Scanning, Ping of Death and other related threats.
The TL-ER6120 features one fixed Gigabit WAN port, one dedicated DMZ/LAN port and three free changeable ports that can be set to either LAN or WAN, allowing the router to support up to four WAN ports to satisfy various Internet access requirements through one device.
The Intelligent Load Balancing function can distribute data streams according to the bandwidth proportion of every WAN port to raise the utilization rate of multi-line broadband. With IP-based Bandwidth Control and Session Limit functions, network administrators can flexibly manage network bandwidth to optimize bandwidth usage.
TL-ER6120 Features |
General
|
Availability: |
currently available
|
LAN / WAN Connectivity
|
WAN ports: |
1 3 changeable LAN/WAN ports |
WAN port(s) type: |
Gigabit Ethernet (RJ-45)
|
WAN port auto cross-over: |
|
LAN ports: |
4 |
LAN ports type: |
Gigabit Ethernet (RJ-45)
|
LAN ports auto cross-over: |
|
Auto-failover connection: |
|
Load Balancing: |
|
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
Port triggering: |
|
DHCP server: |
|
DHCP client: |
|
Dynamic DNS client: |
|
UPnP: |
|
MAC Address clone: |
|
Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) VLAN tagging (802.1q)
|
VPN
|
VPN Authentication: |
MD5 (128-bit), SHA1 (160-bit), IKE (IPSec) Key Management
|
VPN Encryption: |
DES (56-bit), 3DES (168-bit), AES (128-bit)
|
|
IPSec |
IPSec server: |
|
IPSec client: |
|
IPSec passthrough: |
|
IPSec simultaneous tunnels: |
100 |
IPSec throughput: |
130 Mbps |
|
L2TP |
L2TP server: |
|
L2TP client: |
|
L2TP passthrough: |
|
|
PPTP |
PPTP server: |
|
PPTP client: |
|
PPTP passthrough: |
|
PPTP simultaneous tunnels: |
32 |
Firewall
|
SPI firewall: |
|
DoS / DDoS protection: |
|
Filtering: |
Domain/URL blocking, MAC Address filtering, keyword/content filtering, Java, ActiveX, Cookie
|
Device Management
|
Default IP address: |
192.168.0.1 |
Default admin username: |
admin |
Default admin password: |
admin |
Administration: |
Web-based (LAN) Remote configuration (WAN) Telnet / CLI
|
Firmware upgradeable: |
|
Event log: |
|
Usage Statistics: |
|
Diagnostic functions: |
ping, traceroute |
Misc hardware info
|
RAM: |
128 Mb |
Flash Memory: |
8 Mb |
NTP client: |
|
Notes: |
The router features 1 Console Port (RJ-45 On RS232) |
Links
|
Product page: |
http://www.tp-link.com/en/products/detai... |
Datasheet: |
http://www.tp-link.com/Resources/documen... |
Manual: |
http://www.tp-link.com/common/download/?... |
Quick Install Guide: |
http://www.tp-link.com/common/download/?... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|