Shortcuts
|
|
TP-Link TD-W8961ND
|
details: | 300Mbps Wireless N ADSL2+ Modem Router |
hardware type: | DSL Wireless Router |
date added: | 2010-08-06 |
updated: | 2017-02-05 |
The TD-W8961ND Wireless N ADSL2+ Modem Router is an All-in-One device that combines the function of a high speed ADSL modem, a 4-Port 10/100Mbps NAT router and a wireless access point. It is designed to give you a one-stop solution to acquiring and sharing high-speed Internet access over a wired/wireless network.
Supporting the latest ADSL standards, the TD-W8961ND brings with it much higher speed than a dial-up connection. Complying with the IEEE 802.11n standard, users will get up to 15X the speed and 5X the range of conventional 11g products.
This router adopts MIMO technology, has two detachable Omni directional antennas providing better wireless performance, transmission rates, stability and coverage.
Supporting the latest ADSL standard, the TD-W8961ND provides higher performance (up to 24Mbps downstream) and longer reach from center office of your Internet Service Provider (ISP). This device also supports TR-069, which automatically updates the firmware and other setting when they become available from your ISP.
To get started just push the QSS button (a.k.a. WPS button) on the wireless router, then push the QSS button or enter the routers PIN Code in the wireless client, and it automatically establishes a WPA secure connection.
TD-W8961ND Features |
General
|
Availability: |
currently available
|
LAN / WAN Connectivity
|
WAN throughput: |
24 Mbps |
WAN throughput upstream: |
3 Mbps |
WAN ports: |
1 |
WAN port(s) type: |
DSL/ISDN/POTS connector (RJ-11)
|
LAN ports: |
4 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
LAN ports auto cross-over: |
|
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
DHCP server: |
|
DHCP client: |
|
DHCP relay: |
|
Dynamic DNS client: |
|
QoS: |
|
UPnP: |
|
Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) VLAN tagging (802.1q) IGMP Multicast (RFC 1112)
|
DSL
|
DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) RE-ADSL2 (G.992.3 Annex L) ADSL2+ (G.992.5) ADSL2+M (G.992.5 Annex M)
|
PPPoE client: |
|
PPPoA client: |
|
Wireless
|
Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES)
|
WiFi modes: |
Access point
|
external antenna(s): |
2 |
ext antenna(s) removable ?: |
|
Antenna connector: |
RP-SMA (Reverse SMA)
|
Transmit Power: |
+20 dBm |
WDS compatible: |
|
WPS (Wi-Fi Protected Setup): |
|
MIMO: |
|
VPN
|
|
IPSec |
IPSec passthrough: |
|
|
L2TP |
L2TP passthrough: |
|
|
PPTP |
PPTP passthrough: |
|
Firewall
|
SPI firewall: |
|
DoS / DDoS protection: |
|
Filtering: |
Domain/URL blocking, IP Address filtering, MAC Address filtering
|
Device Management
|
Default IP address: |
192.168.1.1 |
Default admin username: |
admin |
Default admin password: |
admin |
Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard Telnet / CLI
|
Firmware upgradeable: |
|
Misc hardware info
|
SNMP support: |
SNMP v.1, SNMP v.2
|
Links
|
Product page: |
http://www.tp-link.com/en/products/detai... |
Datasheet: |
http://www.tp-link.com/Resources/documen... |
Manual: |
http://www.tp-link.com/Resources/documen... |
Quick Install Guide: |
http://www.tp-link.com/Resources/documen... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|