| Archer CR700 Features |
| General
|
| Availability: |
currently available
|
| LAN / WAN Connectivity
|
| WAN throughput: |
680 Mbps
|
| WAN ports: |
1
|
| WAN port(s) type: |
Coax F-connector
|
| LAN ports: |
4 |
| LAN ports type: |
Gigabit Ethernet (RJ-45)
|
| LAN ports auto cross-over: |
 |
| USB port(s): |
2
for printers and storage devices |
| USB port type: |
USB 2.0
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
IGMP Multicast (RFC 1112)
|
| Cable Modem
|
| DOCSIS compliance: |
DOCSIS 1.0
DOCSIS 1.1
DOCSIS 2.0
pre-DOCSIS 3.0
DOCSIS 3.0
|
| Wireless
|
| Maximum Wireless Speed: |
1750 Mbps (Wi-Fi 5)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
802.11ac (Wi-Fi 5)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
Wireless bridge (PtP)
|
| internal antenna(s): |
6 |
| Transmit Power: |
+20 dBm |
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Beamforming: |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| Filtering: |
Domain/URL blocking, IP Address filtering, MAC Address filtering
|
| Device Management
|
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
|
| Firmware upgradeable: |
|
| Diagnostic functions: |
|
| Misc hardware info
|
| RAM: |
256 Mb |
| Flash Memory: |
16 Mb |
| SNMP support: |
SNMP v.1, SNMP v.2
|
| IPv6 support: |
|
| Print Server: |
|
| Links
|
| Product page: |
http://www.tp-link.com/no/products/detai... |
