TP-Link Archer C5400 Wireless Router

Shortcuts

	TP-Link Archer C5400
details:	AC5400 Wireless Tri-Band MU-MIMO Gigabit Router
hardware type:	Wireless Router
date added:	2016-01-23
updated:	2020-02-16

Archer C5400 delivers combined Tri-Band Wi-Fi speeds to 5334Mbps, establishing a network that can connect more devices without slowing down.

Smart Connect helps devices run even faster by assigning them to the best available channel to balance network demand.

The Archer C5400 gets a performance boosts of up to 25%, thanks to NitroQAMTM (1024-QAM) and 4-Stream. These advanced technologies allow the router's 2.4GHz band and both of its 5GHz bands to provide speeds of up to 1000Mbps and 2167Mbps, respectively.

Eight antennas with Beamforming Technology detect the locations of your connected devices and concentrate wireless signal strength toward them.

3G/4G dongle and external hard drives can connect directly to the Archer C5400 via its USB 3.0 and 2.0 ports, making it easy to share 3G/4G connections, files, photos, music, and video across your network.

To help your wired devices achieve peak performance for smooth gaming and streaming, the four Gigabit Ethernet ports operate 10x faster than standard Ethernet.

All TP-Link products

All Wireless Routers

Archer C5400 Features
General
Availability:	currently available
Street price:	$299
LAN / WAN Connectivity
WAN ports:	1 two USB ports for 3G/4G modems
WAN port(s) type:	Gigabit Ethernet (RJ-45)
WAN port auto cross-over:
LAN ports:	4
LAN ports type:	Gigabit Ethernet (RJ-45)
LAN ports auto cross-over:
USB port(s):	2 one of them is USB 3.0 (for 3G/4G USB modems, printers and storage devices)
USB port type:	USB 2.0
Router
NAT routing:
Multihomed:
DMZ:
Port forwarding:
Port triggering:
DHCP server:
DHCP client:
Dynamic DNS client:
QoS:
UPnP:
Wireless
Maximum Wireless Speed:	5300 Mbps (Wi-Fi 5)
WiFi standards supported:	802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) 802.11ac (Wi-Fi 5)
Wifi security/authentication:	WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable
WiFi modes:	Access point Wireless bridge (PtP)
external antenna(s):	8
Transmit Power:	+23 dBm
Receiver Sensitivity:	-77 dBm
WDS compatible:
WMM (QoS):
WPS (Wi-Fi Protected Setup):
MU-MIMO:
Beamforming:
Dual Band (2.4GHz/5GHz):
Simultaneous Dual Band (2.4GHz/5GHz):
VPN
	IPSec
IPSec passthrough:
	L2TP
L2TP passthrough:
	PPTP
PPTP passthrough:
Firewall
SPI firewall:
DoS / DDoS protection:
Filtering:	Domain/URL blocking, IP Address filtering, MAC Address filtering
Device Management
Alternate Admin URL:	http://tplinkwifi.net
Default admin username:	admin
Default admin password:	admin
Administration:	Web-based (LAN) Remote configuration (WAN)
Firmware upgradeable:
Configuration backup/restore:
Event log:
Usage Statistics:
Misc hardware info
IPv6 support:
NTP client:
Print Server:
Links
Product page:	http://www.tp-link.com/en/products/detai...
Datasheet:	http://www.tp-link.com/res/down/doc/Arch...
Manual:	http://www.tp-link.com/res/down/doc/Arch...
Quick Install Guide:	http://www.tp-link.com/res/down/doc/Arch...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please

Post your review/comments

rate: avg: