Shortcuts
|
 |
Tenda TX3
|
| details: | AX1800 Dual Band Gigabit Wi-Fi 6 Router |
| hardware type: | Wireless Router |
| date added: | 2021-04-20 |
| updated: | 2021-04-24 |
TX3 adopts MU-MIMO + OFDMA to significantly improve network performance and efficiency, enabling it to support more client devices at the same time, wipe out latency, enhance multiplayer online games, and enjoy 4K videos more smoothly.
It adopts 5GHz dedicated WLAN full-featured front-end module, equipped with integrated signal amplifier. The concentrated signal makes sure stronger and more stable Multi-story home Wi-Fi coverage. You can enjoy best signal in any corners.
With the 1.5GHz high-performance quad core processor, the network load capacity is comprehensively improved. Instant fast response making the operation more stable.
Supporting BSS coloring technology, TX3 effectively alleviates co-frequency interference, improves spectrum utilization and communication efficiency.
TWT (Target Wake-up Time technology) can effectively reduce the power consumption of terminal equipment and extend its battery life.
The TX3 carries a new generation of WiFi security standard WPA3, which increases the difficulty of algorithmic and network password cracking, can prevent forced- attacks, violent cracking, and protect user privacy in open Wi-Fi networks.
Wi-Fi status can be controlled remotely through the Tenda APP, even while travelling, which facilitates the real-time monitoring of routers.
The TX3 is designed to be compatible with smartphones & devices that support Wi-Fi 6 standard in use.
| TX3 Features |
| General
|
| Availability: |
currently available
|
| Street price: |
$99
|
| LAN / WAN Connectivity
|
| WAN ports: |
1
|
| WAN port(s) type: |
Gigabit Ethernet (RJ-45)
|
| WAN port auto cross-over: |
 |
| LAN ports: |
3 |
| LAN ports type: |
Gigabit Ethernet (RJ-45)
|
| LAN ports auto cross-over: |
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| MAC Address clone: |
|
| Routing Protocols: |
VLAN tagging (802.1q)
|
| Wireless
|
| Maximum Wireless Speed: |
1800 Mbps (Wi-Fi 6)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
802.11ac (Wi-Fi 5)
802.11ax (Wi-Fi 6)
|
| Wifi security/authentication: |
WPA (TKIP)
WPA2 (AES)
WPA3
SSID Broadcast disable
|
| WiFi modes: |
Access point
Repeater mode
WISP mode
|
| external antenna(s): |
4 |
| Antenna gain: |
6 dBi |
| Transmit Power: |
+20 dBm |
| WPS (Wi-Fi Protected Setup): |
|
| MU-MIMO: |
|
| Beamforming: |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| VPN
|
| |
L2TP |
| L2TP client: |
|
| |
PPTP |
| PPTP server: |
|
| PPTP client: |
|
| Device Management
|
| Alternate Admin URL: |
tendawifi.com |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Misc hardware info
|
| IPv6 support: |
|
| Links
|
| Product page: |
https://www.tendacn.com/product/TX3.html |
| Datasheet: |
https://down.tendacn.com/pdfjs/web/viewe... |
| Quick Install Guide: |
https://down.tendacn.com/uploadfile/TX3/... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
