Shortcuts
|
 |
SparkLAN WRTR-502GN
|
| details: | 802.11n Wireless Router |
| hardware type: | Wireless Router |
| date added: | 2010-01-12 |
| updated: | 2020-03-23 |
The WRTR-502GN is a wireless router with one 10/100Base-T WAN port and four 10/100Base-T LAN ports. It integrates MIMO (Multiple In, Multiple Output) technology that can use signal reflections to increase the range and reduce "dead spots" of wireless coverage area. This router supports multi-operation modes: AP, AP Client (Station Infrastructure), Bridge, WDS, and WISP.
The integrated access point complies with IEEE 802.11n (draft 2.0), providing wireless transmission speeds of up to 300Mbps. It supports WEP and WPA/WPA2 wireless encryption. A WPS button allows for worry-free wireless security configuration.
The router provides VPN pass-through for IPSec, L2TP and PPTP. It can be easily configured via Web-based configuration utility, including a Quick Setup Wizard.
| WRTR-502GN Features |
| General
|
| Availability: |
discontinued
|
| LAN / WAN Connectivity
|
| WAN ports: |
1
|
| WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
| WAN port auto cross-over: |
 |
| LAN ports: |
4 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (draft 2.0)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
|
| WiFi modes: |
Access point
Wireless client
Wireless bridge (PtP)
Repeater mode
WISP mode
|
| external antenna(s): |
2 |
| Antenna gain: |
2 dBi |
| Transmit Power: |
+14 dBm |
| Receiver Sensitivity: |
-78 dBm |
| WDS compatible: |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
(blank) |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
|
| Firmware upgradeable: |
|
| Links
|
| Product page: |
http://www.sparklan.com/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
