The Broadband Guide
SG
search advanced

SparkLAN WRTR-501

details: 802.11n Wireless Router
hardware type: Wireless Router
date added: 2010-01-12
updated: 2020-03-23
The WRTR-501 is a wireless router with one 10/100Base-T WAN port and four 10/100Base-T LAN ports. It integrates MIMO technology, which can enhance coverage range and throughput and save the cost to purchase additional wireless equipments to deploy WLAN environment. An external switch allows you to change between Router and AP Modes.

The integrated access point complies with IEEE 802.11n (draft 2.0), providing wireless transmission speeds of up to 300Mbps. It supports WEP and WPA/WPA2 wireless encryption. The WRTR-501 uses WMM (QoS) to prioritize the traffic over the network. A WPS button allows for worry-free wireless security configuration.

The router provides VPN pass-through for IPSec, L2TP and PPTP. It can be easily configured via Web-based configuration utility, including a Quick Setup Wizard.
 
 
 
 WRTR-501 Features
 General
 Availability: discontinued
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: 10/100 Base-TX (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port forwarding of ranges: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 MAC Address clone: yes
 Wireless
 Maximum Wireless Speed: 300 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (draft 2.0)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
Wireless MAC Address filtering
 WiFi modes: Access point
 external antenna(s): 3
 ext antenna(s) removable ?: yes
 Antenna connector: RP-SMA (Reverse SMA)
 Antenna gain: 2 dBi
 WDS compatible: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 VPN
  IPSec
 IPSec passthrough: yes
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: (blank)
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Diagnostic functions: yes
ping, traceroute
 Misc hardware info
 Chipset: Ralink
 Links
 Product page: http://www.sparklan.com/

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About