The Broadband Guide
search advanced


details: 2.4GHz/5GHz 802.11n Wireless Access Point
hardware type: Wireless Access Point
date added: 2010-08-16
updated: 2020-03-21
The EliteConnect Wireless Enterprise Access Point (SMCE21011) is based on IEEE 802.11n and offers data rates of up to 300Mbps either in the 2.4GHz or 5GHz frequency band. The dual-band, single radio Wireless Access Point uses MIMO technology to provide robust and high performance data transmission and increase wireless coverage for enterprise networks. Supporting up to eight Virtual Access Point(VAP) interfaces, the SMCE21011 allows traffic to be separated for different user groups within the same access point service area. Each VAP can be configured with its own Service Set Identification (SSID), security settings, VLAN assignments, and other parameters.

It comes with three detachable dual-band antennas to provide optimal wireless coverage and support for IEEE802.3af Power over Ethernet (PoE) to allow Wi-Fi deployment where power outlets are not available. SMCE21011 provides enterprise level security features such as personal and enterprise versions of WPA/WPA2 (IEEE 802.11i), RADIUS Authentication, Access Control list (ACL), Wireless LAN segmentation and DisableSSID Broadcast. For simplified network management, multiple management options are available, including Web (HTTP), Secure HTTP (HTTPS), Secure Sockets Layer (SSL), Secure Shell (SSH), and Telnet.

The SMCE21011 utilises MIMO technology and Spatial Multiplexing to achieve the highest possible data rate and throughput on the 802.11n frequency. The unit's PoE RJ-45 port provides a 1 Gbps full-duplex link to a wired LAN.
 SMCE21011 Features
 Availability: discontinued
 LAN / WAN Connectivity
 WAN ports: 0
 LAN ports: 1
 LAN ports type: Gigabit Ethernet (RJ-45)
 LAN ports auto cross-over: yes
 Serial port: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 QoS: yes
 Routing Protocols: Spanning Tree Protocol (STP)
 Maximum Wireless Speed: 300 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
 Wifi security/authentication: WEP
RADIUS authentication
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
Wireless client
Wireless bridge (PtP)
 external antenna(s): 3
 ext antenna(s) removable ?: yes
 Antenna connector: RP-SMA (Reverse SMA)
 Antenna gain: 3 dBi
 Multiple SSID: yes
 WDS compatible: yes
 WMM (QoS): yes
 Dual Band (2.4GHz/5GHz): yes
 Device Management
 Default IP address:
 Default admin username: admin
 Default admin password: smcadmin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
Telnet / CLI
SSL secure web
TFTP (RFC 1350)
 Firmware upgradeable: yes
 Event log: yes
 Diagnostic functions: yes
 Misc hardware info
 SNMP support: SNMP v.1, SNMP v.2, SNMP v.3
 NTP client: yes
 Power over Ethernet (PoE): yes
 Product page:

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About