The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

SmartRG SR510n

details: ADSL/VDSL2 + 5-Port 802.11n WiFi
hardware type: Multi-WAN Router
date added: 2017-08-10
updated: 2017-08-15
The SR510n features a highly-integrated xDSL chipset supporting 5-band VDSL2 with fallback to all legacy ADSL modes.

WiFi is provided via the integrated 802.11n 2x2 MIMO 300Mbps Access Point with external dipole antennas, delivering a strong, reliable WiFi signal throughout the home.

The router has four RJ-45 Fast Ethernet LAN ports + RJ-45 Gigabit Ethernet SMARTport (LAN or WAN).

With the included Gigabit SmartPort, the SR510n can also be used as an Ethernet WAN
gateway for FTTH or DOCSIS 3.0 scenarios where a carrier-grade router with industry-leading TR-069 management is required.

With integrated support for the ITU-T's new G.993.5 Vectoring specification, the SR510n works in conjunction with vectoring-enabled DSLAMs to remove crosstalk inteference, allowing lines to reach their full bandwidth potential, as if they were the only lines in the cable binder.

With features such as dedicated hardware accelerator engines for wire-speed packet processing, G.inp Physical Layer Retransmission, advanced IGMP/ Multicast traffic handling, and dynamic LAN port-to-PVC mapping, the SR510n delivers the high throughput at low bit error rate required when delivering HD IPTV services and assures Quality of Service is maintained in the triple play environment.
 
 
 
 SR510n Features
 General
 Availability: currently available
 LAN / WAN Connectivity
 WAN ports: 1
one 10/100/1000Mbps LAN port can be used as a WAN port
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 USB port(s): 2
 USB port type: USB 2.0
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 DNS proxy: yes
 Dynamic DNS client: yes
 QoS: yes
 ToS / DiffServ: yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
RE-ADSL2 (G.992.3 Annex L)
ADSL2+ (G.992.5)
ADSL2+M (G.992.5 Annex M)
VDSL (G.993.1)
VDSL2 (G.993.2)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 300 Mbps
 WiFi standards supported: 802.11n
 Wifi security/authentication: WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
 WiFi modes: Access point
Wireless bridge (PtP)
 external antenna(s): 2
 Multiple SSID: yes
 WDS compatible: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 MIMO: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Usage Statistics: yes
 Misc hardware info
 IPv6 support: yes
 Links
 Product page: http://www.smartrg.com/sr510n
 Datasheet: http://marketing.smartrg.com/acton/attac...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About