Shortcuts
|
|
Sitecom WLR-4004
|
details: | N300 Wireless Gigabit Router |
hardware type: | Wireless Router |
date added: | 2013-09-14 |
updated: | 2014-09-06 |
This router is compliant with 802.11n and up to 6 times faster than standard 802.11g based routers while still being compatible with 802.11g & 802.11b devices. This router is not only a Wireless Access Point, but also doubles as a 4-port full-duplex Gigabit switch that connects your wired-Ethernet devices together at 10/100/1000 Mbps speeds.
At 300 Mbps wireless transmission rate, the Access Point built into the router uses advanced MIMO (Multi-Input, Multi-Output) technology to transmit multiple streams of data in a single wireless channel, giving you seamless access to multimedia content. The robust RF signal travels farther, eliminates dead spots and extends the network range. For data protection and privacy, the router encodes all wireless transmissions with WEP, WPA, or WPA2 encryption.
With the built-in DHCP Server & SPI firewall, the router protects your computers against intruders and most known Internet attacks and also provides safe VPN pass-through. With the high speed and QoS function of 802.11n, the router is suitable for media-centric applications like streaming video, gaming, and VoIP telephony to run multiple media-intense data streams through the network at the same time, with no degradation in performance.
WLR-4004 Features |
General
|
Availability: |
currently available
|
Street price: |
$80 |
Warranty: |
10 year(s) |
LAN / WAN Connectivity
|
WAN ports: |
1 |
WAN port(s) type: |
Gigabit Ethernet (RJ-45)
|
WAN port auto cross-over: |
|
LAN ports: |
4 |
LAN ports type: |
Gigabit Ethernet (RJ-45)
|
LAN ports auto cross-over: |
|
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
DHCP server: |
|
DHCP client: |
|
QoS: |
|
UPnP: |
|
Wireless
|
Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication SSID Broadcast disable
|
WiFi modes: |
Access point
|
internal antenna(s): |
2 |
WMM (QoS): |
|
WPS (Wi-Fi Protected Setup): |
|
VPN
|
|
IPSec |
IPSec passthrough: |
|
|
L2TP |
L2TP passthrough: |
|
|
PPTP |
PPTP passthrough: |
|
Firewall
|
SPI firewall: |
|
DoS / DDoS protection: |
|
Filtering: |
Domain/URL blocking, IP Address filtering
|
Device Management
|
Default IP address: |
192.168.0.1 |
Alternate Admin URL: |
http://sitecom.router |
Default admin username: |
admin |
Default admin password: |
(sticker on the bottom of the device) |
Administration: |
Web-based (LAN)
|
Firmware upgradeable: |
|
Event log: |
|
Usage Statistics: |
|
Misc hardware info
|
IPv6 support: |
|
Links
|
Product page: |
http://sitecom.com/en/wi-fi-gigabit-rout... |
Manual: |
http://sitecom.com/file/full-manual/pdf/... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|