Shortcuts
|
|
Repotec RP-WRE300
|
details: | 300Mbps Wireless-N Range Extender |
hardware type: | Wireless Range Extender |
date added: | 2016-06-10 |
updated: | 2020-03-22 |
RP-WRE300 WiFi Range Extender is designed to extend the coverage and improve the signal strength of an existing wireless network to eliminate WiFi "dead zones". With 300Mbps wireless N speeds, WPS button, compact size and wall-plug design, extending a wireless network is easy.
This easy-to-install WiFi extender help you keep mobile devices, online gaming and computers connected to WiFi with a reliable connection and expanded coverage in every corner of your places.
RP-WRE300 Features |
General
|
Availability: |
discontinued
|
LAN / WAN Connectivity
|
WAN ports: |
0 |
LAN ports: |
1 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
LAN ports auto cross-over: |
|
Router
|
DHCP server: |
|
DHCP client: |
|
Routing Protocols: |
RIP v1 (static routing, RFC 1058)
|
Wireless
|
Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable
|
WiFi modes: |
Repeater mode
|
internal antenna(s): |
1 |
Antenna gain: |
3 dBi |
Transmit Power: |
+19 dBm |
Receiver Sensitivity: |
-65 dBm |
WPS (Wi-Fi Protected Setup): |
|
VPN
|
|
IPSec |
IPSec passthrough: |
|
|
PPTP |
PPTP passthrough: |
|
Device Management
|
Default IP address: |
10.0.0.2 |
Default admin username: |
admin |
Default admin password: |
administrator |
Administration: |
Web-based (LAN)
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Usage Statistics: |
|
Diagnostic functions: |
ping,nslookup |
Links
|
Product page: |
https://www.repotec.com/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|