Shortcuts
|
 |
Repotec RP-WR2404A
|
| details: | Wireless-G ADSL2+ Router |
| hardware type: | DSL Wireless Router |
| date added: | 2010-12-27 |
| updated: | 2020-03-22 |
The ADSL2+ Router provides home connectivity to an ADSL service provider network over an ADSL/Asynchronous Transfer Mode (ATM) physical layer. The router can run upstream transmission rates of 2Mbps and downstream transmission rates of 24Mbps. Four ports switch is provided for connection to an Ethernet LAN or Ethernet-equipped PC.
The integrated access point complies with IEEE 802.11b/g standards, providing wireless transmission speeds of up to 54Mbps. It supports WEP and WPA/WPA2 wireless encryption.
This router has a built-in SPI firewall to protect the network against malicious attacks. It is easy to install and to configure, using a Web-based configuration utility.
| RP-WR2404A Features |
| General
|
| Availability: |
discontinued
|
| LAN / WAN Connectivity
|
| WAN throughput: |
24 Mbps
|
| WAN throughput upstream: |
2 Mbps
|
| WAN ports: |
1
|
| WAN port(s) type: |
DSL/ISDN/POTS connector (RJ-11)
|
| LAN ports: |
4 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DNS proxy: |
|
| Dynamic DNS client: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
|
| DSL
|
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
ADSL2+ (G.992.5)
|
| PPPoE client: |
|
| PPPoA client: |
|
| Wireless
|
| Maximum Wireless Speed: |
54 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
|
| WiFi modes: |
Access point
|
| external antenna(s): |
2 |
| Antenna gain: |
2 dBi |
| Transmit Power: |
+15 dBm |
| Receiver Sensitivity: |
-65 dBm |
| Firewall
|
| SPI firewall: |
|
| Intrusion Detection System (IDS): |
|
| Filtering: |
IP Address filtering
|
| Device Management
|
| Default IP address: |
192.168.16.1 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info
|
| NTP client: |
|
| Links
|
| Product page: |
https://www.repotec.com/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
