Shortcuts
|
|
Repotec RP-IP2404A
|
details: | 4-Port ADSL2+ Router |
hardware type: | DSL Router |
date added: | 2010-12-27 |
updated: | 2020-03-22 |
RP-IP2404A (Anex A) ADSL2+ Router provides home connectivity to an ADSL service provider network over an ADSL/Asynchronous Transfer Mode (ATM) physical layer. The router can run upstream transmission rates of 2Mbps and downstream transmission rates of 24Mbps.
This router has a built-in SPI firewall to protect the network against malicious attacks. It is easy to install and to configure, using a Web-based configuration utility.
RP-IP2404A Features |
General
|
Availability: |
discontinued
|
LAN / WAN Connectivity
|
WAN throughput: |
24 Mbps |
WAN throughput upstream: |
2 Mbps |
WAN ports: |
1 |
WAN port(s) type: |
DSL/ISDN/POTS connector (RJ-11)
|
LAN ports: |
4 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
LAN ports auto cross-over: |
|
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
DHCP server: |
|
DHCP client: |
|
DNS proxy: |
|
Dynamic DNS client: |
|
Transparent Bridging (IEEE 802.1d): |
|
Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389)
|
DSL
|
DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) ADSL2+ (G.992.5)
|
PPPoE client: |
|
PPPoA client: |
|
Firewall
|
SPI firewall: |
|
Intrusion Detection System (IDS): |
|
Filtering: |
IP Address filtering
|
Device Management
|
Default IP address: |
192.168.16.1 |
Default admin username: |
admin |
Default admin password: |
admin |
Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard
|
Firmware upgradeable: |
|
Event log: |
|
Usage Statistics: |
|
Links
|
Product page: |
https://www.repotec.com/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|