The Broadband Guide
SG
search advanced

Prolink H9000G

details: 11b/g Wireless ADSL Router with VPN and Firewall
hardware type: DSL Wireless Router
date added: 2011-11-07
updated: 2020-03-18
The H9000G supports downstream transmission rates of up to 8Mbps and upstream transmission rates of up to 1024Kbps. It is compliant with Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt (G.992.1); G.lite (G992.2); G.hs (G994.1)).

The H9000G is fully compatible with IEEE802.11b/g standards and supports data rate of up to 54Mbps. It uses WEP and WPA wireless encryption.

This router automatically detects and blocks the Denial of Service (DoS) attacks. URL-blocking and packet filtering are also supported. A user can use the Web GUI page to install this device quickly.
 
 
 
 H9000G Features
 General
 Availability: discontinued
 LAN / WAN Connectivity
 WAN throughput: 8 Mbps
 WAN throughput upstream: 1 Mbps
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 Dynamic DNS client: yes
 UPnP: yes
 Transparent Bridging (IEEE 802.1d): yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
IGMP Multicast (RFC 1112)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
 Wifi security/authentication: WEP
WPA (TKIP)
 WiFi modes: Access point
 external antenna(s): 1
 VPN
 VPN Authentication: IKE (IPSec) Key Management
 VPN Encryption: DES (56-bit), 3DES (168-bit)
  IPSec
 IPSec passthrough: yes
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP client: yes
 PPTP passthrough: yes
 Firewall
 DoS / DDoS protection: yes
 Filtering: Domain/URL blocking, packet filtering
 Device Management
 Default IP address: 192.168.1.254
 Default admin username: admin
 Default admin password: password
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
 Firmware upgradeable: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
 Misc hardware info
 SNMP support: SNMP v.2
 NTP client: yes
 Links
 Product page: https://prolink2u.com/
 Datasheet: http://www.speedguide.net/images/hardwar...
 Manual: http://www.speedguide.net/images/hardwar...
 Quick Install Guide: http://www.speedguide.net/images/hardwar...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About