Netgear WNDAP360 Wireless Access Point

Shortcuts

	Netgear WNDAP360
details:	Prosafe Dual Band Wireless-N Access Point
hardware type:	Wireless Access Point
date added:	2012-11-08
updated:	2015-09-23

The ProSafe Dual Band Wireless-N Access Point WNDAP360 is the basic building block of a wireless LAN infrastructure. It provides 2.4 GHz 802.11b/g/n and 5 GHz 802.11a/n connectivity between wired Ethernet networks and radio-equipped wireless notebook systems, desktop systems, print servers, and other devices.

This Access Point can support a small group of users-typically 10 to 32 users per radio-in a range of several hundred feet, with a maximum of 64 supported clients.

The ProSafe Dual Band Wireless-N Access Point WNDAP360 acts as a bridge between the wired LAN and wireless clients. Connecting multiple wireless access points through a wired Ethernet backbone can further increase the wireless network coverage.

The autosensing capability of the ProSafe Dual Band Wireless-N Access Point WNDAP360 allows packet transmission at up to 300 Mbps, or at reduced speeds to compensate for distance or electromagnetic interference.

All Netgear products

All Wireless Access Points

WNDAP360 Features
General
Availability:	currently available
Street price:	$230
LAN / WAN Connectivity
WAN ports:	0
LAN ports:	1
LAN ports type:	Gigabit Ethernet (RJ-45)
LAN ports auto cross-over:
Router
DHCP client:
Routing Protocols:	VLAN tagging (802.1q)
Wireless
Maximum Wireless Speed:	300 Mbps (Wi-Fi 4)
WiFi standards supported:	802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4)
Wifi security/authentication:	WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication Wireless MAC Address filtering SSID Broadcast disable
WiFi modes:	Access point Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode
internal antenna(s):	2
external antenna(s):	2
ext antenna(s) removable ?:
Antenna connector:	RP-SMA (Reverse SMA)
Antenna gain:	5 dBi
Multiple SSID:
WDS compatible:
WMM (QoS):
Dual Band (2.4GHz/5GHz):
Simultaneous Dual Band (2.4GHz/5GHz):
VPN
	IPSec
IPSec passthrough:
	PPTP
PPTP passthrough:
Device Management
Default IP address:	192.168.0.100
Default admin username:	admin
Default admin password:	password
Administration:	Web-based (LAN) Remote configuration (WAN) Telnet / CLI SSH
Firmware upgradeable:
Configuration backup/restore:
Event log:
Usage Statistics:
Misc hardware info
SNMP support:	SNMP v.1, SNMP v.2
NTP client:
Power over Ethernet (PoE):
Notes:	This AP has one console port with RJ-45 Interface
Links
Product page:	http://www.netgear.com/business/products...
Manual:	http://www.downloads.netgear.com/files/W...
Quick Install Guide:	http://www.downloads.netgear.com/files/W...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please

Post your review/comments

rate: avg: