Netgear WNAP320 Wireless Access Point

Shortcuts

	Netgear WNAP320
details:	Prosafe Wireless-N Access Point
hardware type:	Wireless Access Point
date added:	2012-11-08
updated:	2015-09-23

The ProSafe Wireless-N Access Point WNAP320 is the basic building block of a wireless LAN infrastructure. It provides wireless connectivity to multiple wireless network devices within a fixed range or area of coverage - interacting with a wireless network interface card (NIC) through an antenna.

The ProSafe Wireless-N Access Point WNAP320 acts as a bridge between the wired LAN and wireless clients. Connecting multiple wireless access points through a wired Ethernet backbone can further increase the wireless network coverage.

The autosensing capability of the ProSafe Wireless-N Access Point WNAP320 allows packet transmission at up to 300 Mbps, or at reduced speeds to compensate for distance or electromagnetic interference.

This AP provides advanced enterprise security features: WPA2, rogue AP detection and 802.1x with RADIUS support. It also supports IEEE 802.3af PoE for easy placement in optimal locations - desktop, wall-mount or ceiling.

All Netgear products

All Wireless Access Points

WNAP320 Features
General
Availability:	currently available
Street price:	$316
LAN / WAN Connectivity
WAN ports:	0
LAN ports:	1
LAN ports type:	Gigabit Ethernet (RJ-45)
LAN ports auto cross-over:
Router
DHCP client:
Routing Protocols:	VLAN tagging (802.1q)
Wireless
Maximum Wireless Speed:	300 Mbps (Wi-Fi 4)
WiFi standards supported:	802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4)
Wifi security/authentication:	WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication Wireless MAC Address filtering SSID Broadcast disable
WiFi modes:	Access point Wireless client Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode
internal antenna(s):	2
external antenna(s):	2
ext antenna(s) removable ?:
Antenna connector:	RP-SMA (Reverse SMA)
Antenna gain:	5 dBi
Multiple SSID:
WDS compatible:
WMM (QoS):
VPN
	IPSec
IPSec passthrough:
	PPTP
PPTP passthrough:
Device Management
Default IP address:	192.168.0.100
Default admin username:	admin
Default admin password:	password
Administration:	Web-based (LAN) Remote configuration (WAN) Telnet / CLI
Firmware upgradeable:
Configuration backup/restore:
Event log:
Usage Statistics:
Misc hardware info
SNMP support:	SNMP v.1, SNMP v.2
NTP client:
Power over Ethernet (PoE):
Links
Product page:	http://www.netgear.com/business/products...
Manual:	http://www.downloads.netgear.com/files/W...
Quick Install Guide:	http://www.downloads.netgear.com/files/W...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please

Post your review/comments

rate: avg: