Shortcuts
|
 |
Netgear WG103
|
| details: | ProSafe 802.11g Wireless Access Point |
| hardware type: | Wireless Access Point |
| date added: | 2010-01-17 |
| updated: | 2015-09-17 |
The WG103 is an 802.11b/g wireless access point with a single 10/100Base-T LAN port. It can operate in AP, Wireless Bridge and Repeater modes. This AP integrates 802.3af Power Over Ethernet (PoE) function. It uses "Super-G" mode- a proprietary extension to the 802.11g standard, which can double the throughput to 108Mbps. Only compatible wireless stations can use this mode.
This access point can act as a DHCP client. It supports WEP and WPA/WPA2 wireless encryption and 802.1x authentication. It uses WMM (QoS) to prioritize the traffic over the network. Using Wi-Fi Multimedia Power Save (WMM-PS, a.k.a., Unscheduled Automatic Power Save Delivery (u-APSD)) this device saves up to 40% of the battery life of WMM-PS devices connected to the AP.
The WG103 can be easily configured via Web-based configuration utility, including a Quick Setup Wizard or via SNMP v.1/ v.2.
| WG103 Features |
| General
|
| Availability: |
currently available
|
| List price: |
$129 |
| Street price: |
$129
|
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| DHCP client: |
|
| QoS: |
|
| Routing Protocols: |
VLAN tagging (802.1q)
|
| Wireless
|
| Maximum Wireless Speed: |
108 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11g+ (108 Mbps+)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
Wireless bridge (PtP)
Multipoint bridge (PtMP)
Repeater mode
|
| external antenna(s): |
1 |
| ext antenna(s) removable ?: |
|
| Antenna connector: |
RP-SMA (Reverse SMA)
|
| Antenna gain: |
5 dBi |
| Transmit Power: |
+20 dBm |
| Default SSID: |
NETGEAR |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| WMM-PS (QoS): |
|
| Device Management
|
| Default IP address: |
192.168.0.229 |
| Default admin username: |
admin |
| Default admin password: |
password |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
Telnet / CLI
SSH
SSL secure web
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info
|
| Chipset: |
Atheros |
| RAM: |
32 Mb |
| Flash Memory: |
8 Mb |
| Max clients: |
30
|
| SNMP support: |
SNMP v.1, SNMP v.2
|
| Power over Ethernet (PoE): |
|
| Links
|
| Product page: |
http://support.netgear.com/product/wg103 |
| Manual: |
ftp://downloads.netgear.com/files/WG103_... |
| Quick Install Guide: |
ftp://downloads.netgear.com/files/WG103_... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
