| N450 Features |
| General
|
| Availability: |
currently available
|
| List price: |
$119 |
| LAN / WAN Connectivity
|
| WAN throughput: |
340 Mbps
|
| WAN ports: |
1
|
| WAN port(s) type: |
Coax F-connector
|
| LAN ports: |
4 |
| LAN ports type: |
Gigabit Ethernet (RJ-45)
|
| LAN ports auto cross-over: |
 |
| USB port(s): |
2
for storage devices |
| USB port type: |
USB 2.0
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| QoS: |
|
| Cable Modem
|
| DOCSIS compliance: |
DOCSIS 1.0
DOCSIS 1.1
DOCSIS 2.0
pre-DOCSIS 3.0
DOCSIS 3.0
|
| Wireless
|
| Maximum Wireless Speed: |
450 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: |
Domain/URL blocking, IP Address filtering, MAC Address filtering
|
| Device Management
|
| Default IP address: |
192.168.0.1 |
| Default admin username: |
admin |
| Default admin password: |
password |
| Administration: |
Web-based (LAN)
Quick Setup Wizard
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Diagnostic functions: |
|
| Misc hardware info
|
| IPv6 support: |
|
| NTP client: |
|
| Links
|
| Product page: |
http://www.netgear.com/home/products/net... |
| Datasheet: |
http://www.downloads.netgear.com/files/G... |
| Manual: |
http://www.downloads.netgear.com/files/G... |
| Quick Install Guide: |
http://www.downloads.netgear.com/files/G... |
