Shortcuts
|
|
Netgear DGFV338
|
details: | ProSafe Wireless ADSL Modem VPN
Firewall Router |
hardware type: | DSL Wireless Router |
date added: | 2007-08-20 |
updated: | 2015-09-14 |
This router offers wired, wireless connectivity with businessclass protection for small office and remote/branch office users. It combines six functions in a single, compact package - Stateful Packet Inspection (SPI) firewall, 802.11g wireless access point, IPSec Virtual Private Network (VPN), NAT router, an eight port 10/100 fast ethernet switch and built-in ADSL2+ modem support.
Easy and relliable, the DGFV338 delivers both 10 and 100 Mbps connections for wired devices, plus wireless support at 2.4 Ghz frequency at 54 Mbps radio transmission with up to 108 Mbps in 802.11g (region specific).
More than just a simple NAT router, the ProSafe DGFV338 SPI firewall provides businessclass protection, blocking unwanted users from accessing the network. Support for Wi-Fi Protected Access 2 Enterprise (WPA2) shields wireless communication with the highest available level of industry-standard encryption and authentication. Comprehensive controls block or filter unwanted addresses, services, protocols, and URLs, fortifying your network. Up to fifty simultaneous IPSec VPN connections protect links between business locations, encrypting all traffic as it traverses the Internet.
DGFV338 Features |
General
|
Availability: |
discontinued
|
LAN / WAN Connectivity
|
WAN throughput: |
50 Mbps 20 Mbps for 3DES throughput |
WAN ports: |
1 |
WAN port(s) type: |
DSL/ISDN/POTS connector (RJ-11)
|
LAN ports: |
8 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
LAN ports auto cross-over: |
|
USB port(s): |
0 |
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
Port forwarding of ranges: |
|
Port triggering: |
|
DHCP server: |
|
DHCP client: |
|
DHCP relay: |
|
DNS proxy: |
|
Dynamic DNS client: |
|
MAC Address clone: |
|
Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389)
|
DSL
|
DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) ADSL2+ (G.992.5)
|
PPPoE client: |
|
PPPoA client: |
|
Wireless
|
Maximum Wireless Speed: |
108 Mbps
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11g+ (108 Mbps+)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) Wireless MAC Address filtering
|
WiFi modes: |
Access point
|
internal antenna(s): |
0 |
external antenna(s): |
2 |
ext antenna(s) removable ?: |
|
Antenna gain: |
5 dBi |
VPN
|
VPN Authentication: |
MD5 (128-bit), SHA1 (160-bit), IKE (IPSec) Key Management
|
VPN Encryption: |
DES (56-bit), 3DES (168-bit), AES (128-bit)
|
RADIUS support: |
|
|
IPSec |
IPSec server: |
|
IPSec client: |
|
IPSec passthrough: |
|
IPSec simultaneous tunnels: |
50 |
|
L2TP |
L2TP passthrough: |
|
|
PPTP |
PPTP passthrough: |
|
Firewall
|
SPI firewall: |
|
DoS / DDoS protection: |
|
Intrusion Detection System (IDS): |
|
Security log: |
|
Filtering: |
Domain/URL blocking, MAC Address filtering, keyword/content filtering, Java, ActiveX, Cookie
|
Device Management
|
Default IP address: |
192.168.1.1 |
Default admin username: |
admin |
Default admin password: |
password |
Administration: |
Web-based (LAN) Remote configuration (WAN)
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Email alerts: |
|
Diagnostic functions: |
ping, trace route |
Misc hardware info
|
Chipset: |
266 Mhz 32-bit RISC |
RAM: |
32 Mb |
Flash Memory: |
8 Mb |
Max clients: |
253 20 WLAN users |
SNMP support: |
SNMP v.2
|
NTP client: |
|
Power over Ethernet (PoE): |
|
Links
|
Product page: |
http://support.netgear.com/product/dgfv3... |
Datasheet: |
http://www.downloads.netgear.com/files/G... |
Manual: |
http://www.downloads.netgear.com/files/d... |
Quick Install Guide: |
http://www.downloads.netgear.com/files/D... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|