NP805N Features |
General
|
Availability: |
currently available
|
LAN / WAN Connectivity
|
WAN ports: |
1 |
WAN port(s) type: |
Gigabit Ethernet (RJ-45)
|
WAN port auto cross-over: |
|
LAN ports: |
4 |
LAN ports type: |
Gigabit Ethernet (RJ-45)
|
LAN ports auto cross-over: |
|
USB port(s): |
1 for storage devices |
USB port type: |
USB 2.0
|
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
DHCP server: |
|
DHCP client: |
|
Dynamic DNS client: |
|
QoS: |
|
UPnP: |
|
Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389)
|
Wireless
|
Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) SSID Broadcast disable
|
WiFi modes: |
Access point
|
external antenna(s): |
2 |
Antenna gain: |
2 dBi |
WDS compatible: |
|
WMM (QoS): |
|
WPS (Wi-Fi Protected Setup): |
|
VPN
|
|
IPSec |
IPSec passthrough: |
|
|
PPTP |
PPTP passthrough: |
|
Firewall
|
DoS / DDoS protection: |
|
Filtering: |
Domain/URL blocking, IP Address filtering, MAC Address filtering
|
Device Management
|
Default IP address: |
192.168.20.1 |
Default admin username: |
admin |
Default admin password: |
admin |
Administration: |
Web-based (LAN)
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Event log: |
|
Misc hardware info
|
NTP client: |
|
Links
|
Product page: |
http://www.netcommwireless.com/product/w... |
Manual: |
http://media.netcomm.com.au/public/asset... |
Quick Install Guide: |
http://media.netcomm.com.au/public/asset... |