NetComm NP800n Wireless Router

Shortcuts

	NetComm NP800n
details:	Wireless N Router
hardware type:	Wireless Router
date added:	2010-02-04
updated:	2013-04-15

The NP800n is a wireless router with one 10/100Base-T WAN port and four 10/100Base-T LAN ports.

The integrated access point complies with IEEE 802.11n (draft 2.0), providing wireless transmission speeds of up to 300Mbps. It can operate in AP and Repeater modes and supports WEP and WPA/WPA2 wireless encryption. The NP800n uses WMM (QoS) to prioritize the traffic over the network. A WPS button allows for worry-free wireless security configuration.

This router provides VPN pass-through for IPSec, L2TP and PPTP. It features a built-in SPI firewall to protect the network against Denial of Service (DoS) attacks. It can be easily configured via Web-based configuration utility, including a Quick Setup Wizard.

All NetComm products

All Wireless Routers

NP800n Features
General
Availability:	discontinued
List price:	$139
Warranty:	1 year(s)
LAN / WAN Connectivity
WAN ports:	1
WAN port(s) type:	10/100 Base-TX (RJ-45)
WAN port auto cross-over:
LAN ports:	4
LAN ports type:	10/100 Base-TX (RJ-45)
LAN ports auto cross-over:
Router
NAT routing:
Multihomed:
DMZ:
Port forwarding:
Port triggering:
DHCP server:
DHCP client:
Dynamic DNS client:
QoS:
UPnP:
Wireless
Maximum Wireless Speed:	300 Mbps (Wi-Fi 4)
WiFi standards supported:	802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft 2.0)
Wifi security/authentication:	WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering
WiFi modes:	Access point Repeater mode
external antenna(s):	2
ext antenna(s) removable ?:
WDS compatible:
WMM (QoS):
WPS (Wi-Fi Protected Setup):
VPN
	IPSec
IPSec passthrough:
	L2TP
L2TP passthrough:
	PPTP
PPTP passthrough:
Firewall
SPI firewall:
DoS / DDoS protection:
Filtering:	Domain/URL blocking, IP Address filtering, MAC Address filtering
Device Management
Default IP address:	192.168.20.1
Default admin username:	admin
Default admin password:	admin
Administration:	Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard
Firmware upgradeable:
Configuration backup/restore:
Event log:
Diagnostic functions:
Misc hardware info
NTP client:
Links
Product page:	http://www.netcommwireless.com/product/w...
Datasheet:	http://www.netcomm.com.au/__data/assets/...
Quick Install Guide:	http://www.netcomm.com.au/__data/assets/...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please

Post your review/comments

rate: avg: